Dating vintage guitars, one comment
The Ink Stamped serial number stopped at the end ofthough a few instruments were made with a "1" ink stamped prefix. Gibson Hollowbody instruments to Murph guitars were made Strings While a circumstantial long shot the strings in the case can also provide some useful evidence.
The decade, though not directly shown by the source-date code, was easily determined because this particular amp was only made during the s. Both seen on ES model: I will publish them so they will be available free to all. You have to make that call.
The FON is usually located on the neck block.
Model date range Some manufacturers offer specific models for a limited period artistic name plates in bangalore dating. Reissue and custom shop serial numbers in various formats.
Stamped on the back of the peghead. Tall numbered gold knob, used from to"speed" knob as used from to"bonnet" knob as used from todating vintage guitars top bonnet" knob or "reflector" knob as used from mid to mids on many, but not all models.
Low end models with no serial number. Though any s era of these three LP models could also have a four latch case. Vintage Reissues and Custom Shop Models, to present.
Vintage guitar dating
Prior toall screws should be slot style. Number and model name on white paper label, number range to Depending on the demand for the instrument, it could take Gibson up to 6 months to finish the instrument.
Factory Order Numbers with a Letter, to Two plastic rings on the plastic "tulip" tuner knob. This information was compiled from these sources: If there is a serial number on the back of the peghead, the "2" is usually seen centered above or below it.
From toall models including the above use laminated maple back and sides. Also sometimes stamped was "CULL", which is another designation of a second. Next to it is the version where the switch tip changed to a plastic material that stayed white, and had a visible seam.
Some models never got these knobs such as the and later Les Pauls.
Year Last Number April 28, "A" style serial numbers as used from to Source-date codes have been published by the EIA since This actually makes alot of sense from a manufacturing stance as they no longer had to order plates that denoted year of production and could just order consecutive numbered plates without care to year.
Middle row, left to right: Looks like a hat box, flared base, back painted gold or black, clear with numbers 1 to 10 visible thru knob: In cases where generic non model specific plates are used the 4 digit number is just the consecutive number of that plate which could have made it on possibly 10 different models.
Manufacturing date range Some instruments are easy to date simply because historical records indicate that the manufacturer or brand was only made for a limited period. Address Plates - The cast black and chrome neck plates like the JS, these bear a 6 digit serial number.
It can be stamped or marked on any product to identify the production source vendor and date of manufacturer.
To make things even more interesting, they sometimes wrote the serial number or factory order number with a near-invisible pencil, sometimes ink-stamped it in disappearing ink it seemsand sometimes pressed it into the wood. Neck Shape Spanish models.
Gibson Factory Order Numbers, to How the Source-Date Code Works. In this case the later serial number is the one to believe, as the instrument was probably started and completed in different years.
Back shape is about the same as the era, but the narrow nut width makes these necks feel like "pencil necks". The first digit will be the last digit of the year, ie.
Hence the FON number could be one year, and the serial number the next year. A Universe plate would denote a production year of 91 and the th Universe built.
What a serial number can and can't tell you about your Gibson
But I have seen them used on Stackpole pots on electric National guitars as early as This is very rare, but seen on a few lap steels pressed in serial numbers started in for all Gibson instruments and a few Les Paul models.
And they also have a combination lock on the main exterior latch and a leather handle. Most models have nut width dramatically reduced making the neck feel very small. Again Phillips head screws started to be used at Gibson in the phillips head screw was original patented in Two variations, one almost 6" long extending diagonally from the bridge to almost the neck, the other shorter and more conventional looking and mounted at less of an angle.
In either case, the code works the same. Return to the Main Index.
The Marketplace for Musicians | michelemcleodbarrelhorses.com
In the lacquer experimentation process began on less expensive models like the opaque white top A3, L3, and Sheraton Brown "A" models.
This new serial number system allows determination of the exact date the instrument was stamped with the serial number, and the factory of manufacturer.
Option on J, J, SJ: ByGibson starting using tuners with the "Gibson Deluxe" name on them, but these were actually made by Kluson. This was short lived though.
Letter followed by 3 digits, custom shop or limited edition models only: If so, you can check the pot or speaker for the source-date code, and determine an approximate age from that. Gibson Serial Numbers for Hollow bodies, to Instruments with an "Artist" serial number should also have a Factory Order Number by which a date can be cross-referenced.
Single line "Kluson Deluxe" in a single vertical line on the ribbed metal tuner cover. Also there are many guitars whose necks have been replaced due to breaks or just bad necks.